ciscostaticrouteinterface

2011年4月20日 — You can use a fully specified static route when the output interface is a multi-access interface and you need to identify the next-hop address.

This document describes static routes and uses a problem scenario to demonstrate when it is desirable to specify how to reach the next hop IP address.

You can use a fully specified static route when the output interface is a multi-access interface and you need to identify the next-hop address. The next-hop ...

... route o - ODR, P - periodic downloaded static route Gateway of last resort is not set. Ad. 然後我們在Interface 設定IP Address 並把Interface 啟動(假設這個 ...

In order to configure static routing in Cisco IOS routers, this is the command to use. ... The IP route command includes the destination network followed by a ...

My thoughts: When adding a static route, it is allowed to use a Interface as target instead of next hop IP address. In case of a serial connection between two ...

2012年11月3日 — Introduction: This document describes the difference between implementation of static routes with next hop as an exit interface or an IP ...

2023年7月10日 — This is the floating static route to the LAN. 以下是R2 上的組態： hostname R2 ! interface Serial1/0 ip address 10.10.10.2 255.255.255.252